Make a multipoint lock eurogroove in a single pass
This unique fixture, in conjunction with a eurogroove bit (sold separately), quickly and efficiently enables you to mortise the eurogroove in one pass. This is specifically designed to guide a router for the mortising of a “stepped” eurogroove required for the installation of most multipoint locking systems. Easily adjusts for door thicknesses up to 2-3/4”.
- Adjustable fixture guides router for the installation of the eurogroove in a door edge.
- Uses stepped bit (below) for quick, one-pass cut.
- Includes Dewalt 1-3/4 HP Router (15-174).
- Eurogroove bits sold separately, see below
- Instructions
| COMPONENTS | ||
|
CATALOG #
|
DESCRIPTION
|
QUANTITY
|
| 7702-702 | STYLIZER II ASSEMBLY |
1
|
| 15-174 | Dewalt 1-3/4 HP Router |
1
|
| INSTRUCTIONS |
1
|
|
Shipping Weight 14 lbs.
Optional or Additional Items:
| Part # | MFG | A | B | C | D |
| NOR751 | Schlegel | .125 | .250 | .750 | 1.00 |
| NOR757 | Truth | .125 | .406 | .563 | .800 |
| NOR755 | GU | .098 | .374 | .492 | .650 |
| NOR756 | Roto-Frank | .098 | .359 | .484 | .630 |
| NOR753 | Hoppe | .125 | .367 | .500 | .630 |
| NOR758 | Winkhaus | .098 | .366 | .480 | .795 |
| NOR759 | Winkhaus | .098 | .366 | .480 | .638 |
If you don’t want the eurogroove to extend the full length of the, the Stylizer Stop can be used to stop the fixture before it reaches the end of the door. The stop clamps to the door and is adjustable as required. Two units may be needed, one for the top of the door and the other for the bottom.
euro groove
Check items to add to the cart or
