8900 Deep Lock Mortiser
Deep pocket mortising without templates, extended faceplate routing, raised molding compatible, high volume, integrate into a magnum system
Variety of pocket lengths and depths faceplates and sizes
Ease of operation
Programmable logic controller - safety, reliablility, quick trouble shooting
Infinite adjustment capability using adjustment bolts (not available with other machines using templates)
Standard features
- Quick setup using turret, which controls width for four settings while adjustable stop is used for fine tuning the fit of the plate
- Integrate into a Magnum System
- Mortiser and faceplate router dust collection
- Faceplate routing with square to face of door or on a 3° bevel -- changeover time:15 sec
- Doors greater than 8'-0" can be processed using a layout line system
Specifications
Door Width | no limit | |
Door Height | 6'4" | 9'0" |
Door Thickness | 1-3/8" | 2-1/4" |
Pocket Length | 1" | 8" |
Pocket Depth | up to | 6" |
Pocket Width | 3/4" | 1-1/4" |
Faceplate Width | 1" | 1-1/4" |
Faceplate Length | 1/2" | 8-1/2" |
Faceplate Depth | up to | 3/8" |
Approx. Shipping Weight | 800 lbs | |
Floor Space | 3' x 15' | |
Electrical | 208/230V 3Phase@ 25Amps(w/vac) 208/230V Single Phase @ 20Amps |
|
Air | 2.2 CFM @ 90 PSI | |
Vacuum | 1900CFM with 5" duct |